Die and Coil Handling And Storage > Dies systems > Dies Splitter

DIE-SPLITTER

The die-splitter is used for disassembling, maintenance and re-assembling operations on dies of cutting – stamping area.

Easy and safe maintenance for the operator 
The platens of the die-splitter are provided with 2 large cavities that allow the operator to reach the lower part of the die-half, allowing rapid assembly and disassembly of the various parts of the dies

Advantages
- Remarkable reduction of assembly and maintenance times.
- Ergonomic positions for performing work on the dies.
- Extremely easy die-handing. 

Construction
The sturdy structure consists of a welded and normalized steel base, columns and platens. 

Lower plate
The lower plate travels on rails away the columns for clear and open loading and unloading. At the ends of the rails is a 90 degree tilting option that tilts the lower die section to a vertical position for easy access to the front and back. After the die is loaded, the plate positions itself between the columns on return travel by mechanical locking, to ensure precision opening and closing of the die halves and repeatability. 

Precision upper plate
As the upper plate slides vertically by hydraulic actuation on the 4 guide-columns and rotates 360 degrees by reduction gears, it is possible to put the upper die half in any work position to carry out the working operations. Clamping of the upper plate in the exact horizontal position is performed using 4 hydraulically actuated locating pins.