Die and Coil Handling And Storage > Dies systems > Loading, unloading and transport of Dies

MANUBLOC - FROM 1 TO 12 TONS

There is no doubt that the MAH-type MANUBLOC is the SIMPLEST and the most COMPLETE system.

It allows you to take a tool (up to 12 tons)  from a storage rack (see CANTIBLOC range), to transport it and to position if on the press bed.

All these operations, carried out perfectly safely in LESS than 2 MINUTES, are completed by only ONE OPERATOR who remains continously at the control unit of the system.

SPECIFIC CHARACTERISTICS
- ROLLMATIC FORKS : retractable rollers with heavy cage and combined needle rollers.
They are up while the tool is loaded onto the press, but are down while you transport the tool, which thereby rests on the structure of the forks.

- QUICK BLOC : very simple, hydraulic operated Push/Puyll syste. Its synchronous double articulation huydraulic scissors principle allows it free to remain completely rigid in the space.
The coupling with twin bayonet fitting principle allows the tool to be coupled or uncoupled automatically as a background task during the rack stacking phase (International patent)

ANCILLARIES:

- CBH : LEVELLING HOOKS / STOPS.
In order to transfer the tool in complete safety, it is vital to temporarily attach the MANUBLOC to the press. CBH hooks fullfil this function.

- VPLA : LATERAL POSITIONNING
These are V-shaped metal parts that are to be attached to the press or in front of each rack module.

- CH30 : HOOKS.
Parts designed to be attached to the lower sole plate of each tool: they allow the "QUICKBLOC" push / pull system to be coupled / uncoupled.

» Select support